In
what ways does your media product use, develop or challenge forms and
conventions of real media products?
The magazine I
created uses and develops many forms and conventions of real media products,
from the creation of the media product to the way in which the pages are
structured and the content that goes along with it. The way I structured my
magazine’s content and text was based on examples I found online or from real
magazines from the shops. I examined how the professional magazine companies
structured their content in order to give me ideas about how I would structure
my magazine, and what and how much content would go on to each page. For
example, I looked at a number of magazine front covers to look at how much
content it contained and the distribution between the amount of text and
images. I then decided on how much of each could be put on to our front cover
to make it look the best it could possibly be. I felt that this was
beneficial to me because it gave me good ideas to build on in order to create
my magazine. I also challenged some of the techniques used by professional
magazines on the front cover. I noticed that magazines use either one technique
or the other; keeping the font style consistent and neatly structured, leaving
space, or making the front page look explosive by placing content all around
the page over shapes. I challenged this by mixing the two together in order to
give my magazine a unique look. Professional magazines were most beneficial to
me when creating my double page spread. I realised that a lot of magazines
structured these pages in columns, similar to a newspaper. I also realised that
if the double page spread contained an interview, the questions were in a different
colour to the answers. I applied these techniques to my own double page spread
to make it look as professional as possible. I also looked at professional
contents pages and I decided develop mine to make it look a bit different. I realised
that most magazines’ contents pages consisted of the magazine’s contents on the
left and a small section of an interview with an image that takes up the rest
of the page. The image is usually placed separate from the text, and I decided
to do things differently. I still listed the magazine’s content on the left
side of the page, but I decided to place the image in the middle of the page
and work the text around it. The text temporarily ended above the image, and
started off again after it.
How
does your media product represent particular social groups?
My media product
concentrates on two main music genres; hip-hop/rap and indie/rock. These
different stereotypes are both represented differently in my magazine.
Obviously the magazine is aimed at and will appeal to people involved with
these two social groups, as they are portrayed as unique and different to one
another. The rap star and main focus of the magazine, Jonny P, is presented as
a typical rapper. This is evident from his clothing and his stance, as he wears
a gangster hat and clothing, while looking cool and relaxed. On the other hand,
the indie group, Kasaiplay, are shown wearing typical clothing for their social
group. They wear jeans and casual shirts with jackets, and are pictured in a
group all together looking similar to one another. These clothes are of a mix
of colours, as there isn’t a particular colour that goes along with rap music. If
my magazine was targeting an audience associated with hard rock, then black
would have been the more popular choice. The audience which the magazine is
targeting with these two social stereotypes will be drawn to the magazine when
they see their favourite music artists, as they like that particular field of
music and probably have a similar dress sense to them too. I think I was right
to present the artists included in our magazine in a typical way because it
boosts the appeal of the magazine to these specific stereotypes.
What
kind of media institution might distribute your media product and why?
Media
institutions that have experience in and distribute music magazines may
distribute my media product because it comes under that category. Institutions
that distribute popular music magazines such as IPC with “NME” and the Bauer
Media Group with “Kerrang” would look at the possibility of distributing my
magazine, if it matched their high standards of course. There could also
be the look into Medium convergence and an App release in association with
Android and iTunes. There could also be a web readable version with a paying
subscription of paperback that can be confirmed online or a single online
subscription.
Who
would be the audience for your media product?
My
magazine is aiming at the younger generations of current music listeners, the
age area being 15 to around mid-20’s. The magazine would most probably go down
best in this age bracket because they would be the most accepting of the
magazine and it is a time in most people’s lives where music has more of a
meaning and is listened to much more frequently by the younger generations. If
I aimed the magazine at the older generations by including different genres of
music such as classical music, I would be aiming at a smaller audience which
would lead to making less money. This is because of reasons already mentioned,
such as the fact that the age group I am aiming the magazine at regard music as
a bigger part of their lives and have strong views and opinions on the subject.
How
did you attract/address your audience?
I
targeted my audience in many different ways to attract them to the magazine. Of
course I needed to decide on a specific age group to target with a specific
genre of music, which has already been mentioned to be between 15 to mid-20s.
This was really the main thing I did to attract a certain audience; by
associating the right genre of music with the right age group. I included separate
content in the magazine such as gadget reviews and music charts, which I knew
would boost the appeal of my magazine. The name of my magazine is also a big
contributor to the attraction of it, as it too can be associated with the
specific age I am targeting. The title “Banging Tunes” includes two words that
have really only started to be used in recent times with the youth of today, as
these words are to be considered as cool. These words can also be associated
with one of my included genres; hip-hop/rap music
I also
tried to attract our target audience in the typical ways, such as making the
front cover eye catching and different. Making the front cover look good, I
thought, would instantly attract the audience to my magazine. The inclusion of
big name bands and artists also boosts the appeal the magazine has to my target
audience.
What
have you learnt about technologies from the process of constructing this
product?
I have learnt a
lot about certain technologies during the period of time used to construct the
media product. I have learnt a lot about the actual hardware used to construct
the product, which were Apple Macs. I wasn’t used to using this hardware and
some of the software included in it, but during the course of time spent constructing
I have learnt an awful lot in terms of actually using the hardware to its full
potential. Using the Macs also made the process of transferring my photos from
the photo device used on to the Macs easier, as an Apple iPod was used to
capture the images I took, as well as the standard digital camera for some
alternative images. I also learned and practised my skills on Adobe Photoshop
during the course of time I spent working on constructing the media product.
The more I used the software, the more efficient I became at using it.
Looking
back at your preliminary task, what do you feel you have learnt in the
progression from it to the full product?
I had a
lot in time between creating my own individual preliminary tasks, to where I am
now with the finished product. During the preliminary task, I learned and
practised the necessary steps required to making a quality media product. These
steps included drafting, colour and font testing, questionnaire creating and
analysing, etc. Learning these skills helped to make the planning process for
the main task a lot more efficient, as I knew what I was supposed to do
straight away. Working in a pair was also extremely beneficial when it came to
planning; for example, the font and colour testing, which we split between us.
This enabled us to complete this work quicker.
I have
also learnt a lot about the hardware and software I used to create the product,
as mentioned previously. I learnt which tools did what in Adobe Photoshop, and
also learnt how to use the Macs to their full capability. As I progressed
through the creation process, I learnt more and more about the software I was
using, which resulted in completing work quicker towards the end of the main
task.
After
finishing the first of my finished products for the three pages I was required
to make, I thought that they were fantastic and that they couldn’t be improved.
I then looked at some examples of magazines from professional companies and
realised that my final product was nowhere near good enough. I then started to
focus more on trying to make the products look like the professional ones, and
this was a great learning curve for me personally. My first final product
didn’t possess anywhere near the amount of content, consistency and overall
quality required to match the high standards of the professional company’s
magazines. I then learnt from my mistakes and went on to create a better
magazine by keeping the colours I used consistent across all pages, adding more
content to the little I already had, and taking a wider variety of pictures to
use. I was pleased with my proper final product and thought I was a fool for
thinking that my previous final product was good enough to make it to the top.
This was the biggest learning curve throughout the whole creation process.
No comments:
Post a Comment